ADD EDIT + TOOLS

install-danos.sh

@@ -12,7 +12,13 @@ NEW_USERNAME=$(grep ":1000:" /etc/passwd | cut -d: -f1)
 export NEW_USERHOME
 export NEW_USERNAME
 #
-
+# Add user-setup and first-login-user-setup, so that they can be added to as needed and run at the end and on first login.
+echo "#!/usr/bin/env bash" >>"$NEW_USERHOME"/.first-login-user-setup
+chmod +x "$NEW_USERHOME"/.first-login-user-setup
+chown "$NEW_USERNAME":"$NEW_USERNAME" "$NEW_USERHOME"/.first-login-user-setup
+echo "#!/usr/bin/bash" >>"$NEW_USERHOME"/.user-setup
+chmod +x "$NEW_USERHOME"/.user-setup
+chown "$NEW_USERNAME":"$NEW_USERNAME" "$NEW_USERHOME"/.user-setup
 # User command
 #runuser -l "$NEW_USERNAME" -c 'commands'
 #
@@ -142,7 +148,7 @@ DEBIAN_FRONTEND=noninteractive apt update
 if lscpu | grep -iq "QEMU"; then
   echo "QEMU Virtual CPU detected. Installing xrdp and restarting service..."
   apt update
-  DEBIAN_FRONTEND=noninteractive apt -y install xserver-xorg picom arandr autorandr rofi xrdp xorgxrdp qemu-guest-agent xsecurelock xss-lock
+  DEBIAN_FRONTEND=noninteractive apt -y install xserver-xorg xserver-xorg-input-all picom arandr autorandr rofi xrdp xorgxrdp qemu-guest-agent xsecurelock xss-lock
   usermod -aG xrdp "$NEW_USERNAME"
   systemctl restart xrdp.service
   ufw allow 3389/tcp comment Remote_Desktop_Protocol
@@ -158,7 +164,7 @@ DEBIAN_FRONTEND=noninteractive apt -y install bash-completion kitty bind9-dnsuti
 DEBIAN_FRONTEND=noninteractive apt -y install build-essential dkms mokutil ufw gufw unzip cron openssh-server xdg-desktop-portal xdg-desktop-portal-gtk unattended-upgrades
 #DEBIAN_FRONTEND=noninteractive apt -y install xdg-desktop-portal-wlr wofi
 DEBIAN_FRONTEND=noninteractive apt -y install mc thunar gvfs gvfs-backends nsxiv mpv flameshot parted gparted mpd mpc ncmpcpp fzf ccrypt xarchiver notepadqq
-DEBIAN_FRONTEND=noninteractive apt -y install colord mesa-utils htop tmux numlockx xdg-utils fancontrol xbacklight brightnessctl pm-utils ncdu less
+DEBIAN_FRONTEND=noninteractive apt -y install colord mesa-utils htop btop tmux numlockx xdg-utils fancontrol xbacklight brightnessctl pm-utils ncdu less tealdeer
 DEBIAN_FRONTEND=noninteractive apt -y install fwupd firmware-iwlwifi bluez-firmware
 #
 # Keyboard layouts, fonts, character sets and replacement tables for kbd / Keyboard
@@ -933,15 +939,14 @@ GTK4SETTINGS
 CURRENT_HOSTNAME=$(hostname)
 if [ "$CURRENT_HOSTNAME" = "danos" ] || [ "$CURRENT_HOSTNAME" = "debian" ]; then
   # Generate and set a new hostname
-  THE_NEW_HOSTNAME="$(openssl rand -base64 6)-DanOS"
+  THE_NEW_HOSTNAME="$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | head -c 6)-DanOS"
+  #THE_NEW_HOSTNAME="$(openssl rand -base64 6)-DanOS"
   echo "$THE_NEW_HOSTNAME" | tee /etc/hostname
   sed -i "s/127.0.1.1.*/127.0.1.1 $THE_NEW_HOSTNAME/" /etc/hosts
   # Update /etc/machine-info (for systems using systemd)
   #sed -i "s/HOSTNAME=.*/HOSTNAME=$THE_NEW_HOSTNAME/" /etc/machine-info
 fi
 #
-echo "#!/usr/bin/env bash" >>"$NEW_USERHOME"/.first-login-user-setup
-chown "$NEW_USERNAME":"$NEW_USERNAME" "$NEW_USERHOME"/.first-login-user-setup
 #
 # Remove extrepo_google_chrome.sources it makes its own source list file after installation
 rm /etc/apt/sources.list.d/extrepo_google_chrome.sources
@@ -961,6 +966,19 @@ cat <<"FIRSTUSERLOGINSETUP" >>"$NEW_USERHOME"/.first-login-user-setup
 if [ -f "$HOME/.first-login-user-setup" ]; then
   echo "Running User first login setup..."
   xdg-user-dirs-update
+  gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
+  gsettings set org.gnome.desktop.interface gtk-theme "EliverLara-Nordic"
+  # Remove first-login-user-setup file
+  rm -f "$HOME"/.first-login-user-setup
+fi
+#
+FIRSTUSERLOGINSETUP
+#
+# Add user-setup
+
+cat <<"USERSETUP" >>"$NEW_USERHOME"/.user-setup
+# User setup
+if [ -f "$HOME/.user-setup" ]; then
   mkdir -p ~/Screenshots
   xdg-mime default kitty.desktop text/x-shellscript
   xdg-mime default nsxiv.desktop image/jpeg
@@ -968,15 +986,17 @@ if [ -f "$HOME/.first-login-user-setup" ]; then
   xdg-mime default thunar.desktop inode/directory
   # Set xdg-desktop-portal prefer dark mode.
   # See more run: gsettings list-schemas
-  gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
-  gsettings set org.gnome.desktop.interface gtk-theme "EliverLara-Nordic"
   # Sound systemctl enable --user
   systemctl enable --user --now pipewire.socket pipewire-pulse.socket wireplumber.service
-  # Remove first-login-user-setup file
-  rm -f "$HOME"/.first-login-user-setup
+  # Remove .user-setup file
+  rm -f "$HOME"/.user-setup
 fi
 #
-FIRSTUSERLOGINSETUP
+USERSETUP
+#
+# Run first-login-user-setup under the installation
+# shellcheck disable=SC2016
+runuser -l "$NEW_USERNAME" -c '/usr/bin/bash $HOME/.user-setup'
 #
 # Add / Copy the ETC Environment
 if [ -d /tmp/src/etc/ ]; then

iso-to-usb

@@ -38,11 +38,11 @@ fi
 
 # Execute the dd command
 echo "Writing '$1' to '$2'..."
-time sudo dd bs=4M status=progress conv=fsync oflag=direct if="$1" of="/dev/$2"
+time sudo dd bs=8M status=progress conv=fsync oflag=direct if="$1" of="/dev/$2"
 
 # Check the exit code of the dd command
 if [ $? -eq 0 ]; then
-  echo "Write complete."
+  echo "ISO to USB Write complete."
 else
   echo "Write failed. Check for errors."
 fi

preseed-user.cfg

@@ -46,7 +46,6 @@ d-i netcfg/hostname string danos
 
 # Provide a default domain but still ask
 d-i netcfg/get_domain string
-d-i netcfg/get_domain seen false
 
 ### Description: Wireless ESSID for ${iface}:
 #   Attempting to find an available wireless network failed.
@@ -82,17 +81,17 @@ d-i netcfg/get_domain seen false
 
 ### Localization
 
-# TEST
+# TEST OK
 # Language and locale
-d-i debian-installer/language string da
-d-i debian-installer/country string DK
-d-i debian-installer/locale string da_DK.UTF-8
+#d-i debian-installer/language string da
+#d-i debian-installer/country string DK
+#d-i debian-installer/locale string da_DK.UTF-8
 
 # Keyboard configuration
-d-i keyboard-configuration/xkb-keymap select dk
-d-i keyboard-configuration/variant select Danish
-d-i keyboard-configuration/layoutcode string dk
-d-i keyboard-configuration/layout select da
+#d-i keyboard-configuration/xkb-keymap select dk
+#d-i keyboard-configuration/variant select Danish
+#d-i keyboard-configuration/layoutcode string dk
+#d-i keyboard-configuration/layout select da
 
 # Preseeding only locale sets language, country and locale.
 #d-i debian-installer/locale string da_DK.UTF-8
@@ -100,7 +99,9 @@ d-i localechooser/translation/warn-light boolean true
 d-i localechooser/translation/warn-severe boolean true
 #
 # FROM sudo debconf-get-selections --installer
-d-i debconf/language string da
+#d-i debconf/language string da
+#
+#
 #
 # The values can also be preseeded individually for greater flexibility.
 #d-i debian-installer/locale string da_DK.UTF-8
@@ -242,11 +243,11 @@ d-i passwd/root-login boolean false
 #d-i passwd/root-password-crypted password [crypt(3) hash]
 
 # To create a normal user account.
-d-i passwd/user-fullname string DanOS Debian
-d-i passwd/username string danos
+#d-i passwd/user-fullname string DanOS Debian
+#d-i passwd/username string danos
 # Normal user's password, either in clear text
-d-i passwd/user-password password Danos
-d-i passwd/user-password-again password Danos
+#d-i passwd/user-password password Danos
+#d-i passwd/user-password-again password Danos
 # or encrypted using a crypt(3) hash.
 #d-i passwd/user-password-crypted password [crypt(3) hash]
 # Create the first user with the specified UID instead of the default.
@@ -288,7 +289,7 @@ d-i clock-setup/ntp boolean true
 # - regular: use the usual partition types for your architecture
 # - lvm:     use LVM to partition the disk
 # - crypto:  use LVM within an encrypted partition
-d-i partman-auto/method string regular
+#d-i partman-auto/method string regular
 
 # You can define the amount of space that will be used for the LVM volume
 # group. It can either be a size with its unit (eg. 20 GB), a percentage of

preseed-user.cfg.bak

@@ -0,0 +1,607 @@
+#_preseed_V1
+# DanOS Version
+#### Contents of the preconfiguration file (for trixie)
+#
+# debconf-utils
+# Get info for debian-installer run: sudo debconf-get-selections --installer
+# Check / Test the preseed.cfg file run: sudo debconf-set-selections -c preseed.cfg
+#
+d-i auto-install/enable boolean true
+d-i preseed/interactive boolean true
+#
+# Set prioritys
+d-i debconf/priority string high
+#d-i debconf/priority string critical
+#d-i debconf/priority string high
+#d-i debconf/priority string medium
+#d-i debconf/priority string low
+
+# Choices: SSID
+### Description: Wireless ESSID for ${iface}:
+#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
+#   of the wireless network you would like ${iface} to use. If you would like
+#   to use any available network, leave this field blank.
+#d-i netcfg/wireless_essid string
+
+#d-i netcfg/get_hostname string danos
+#d-i netcfg/get_hostname seen false
+
+
+# Make sure installer prompts for SSID and WPA key
+#d-i netcfg/wireless_essid note critical
+#d-i netcfg/wireless_show_essids note critical
+#d-i netcfg/wireless_wpa note critical
+#d-i netcfg/wireless_security_type note critical
+d-i netcfg/hostname string danos
+#d-i netcfg/wireless_wpa string
+#d-i netcfg/wireless_wpa seen false
+#d-i netcfg/wireless_show_essids select
+#d-i netcfg/wireless_show_essids seen false
+#d-i netcfg/wireless_essid seen false
+#d-i netcfg/wireless_security_type select wpa
+#d-i netcfg/wireless_security_type seen false
+# Ask user for hostname
+# (don’t preseed, so installer will prompt)
+# d-i netcfg/get_hostname string
+
+# Provide a default domain but still ask
+d-i netcfg/get_domain string 
+d-i netcfg/get_domain seen false
+
+### Description: Wireless ESSID for ${iface}:
+#   Attempting to find an available wireless network failed.
+#   .
+#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
+#   of the wireless network you would like ${iface} to use. To connect to any
+#   available network, leave this field blank.
+#d-i netcfg/wireless_essid_again string
+
+### Description: Wireless network type for ${iface}:
+#   Choose WEP/Open if the network is open or secured with WEP.
+#   Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK
+#   (Pre-Shared Key).
+#d-i netcfg/wireless_security_type select wpa
+# Possible choices: WEP/Open Network, WPA/WPA2 PSK
+#d-i priority-critical select netcfg/wireless_show_essids
+
+# WPA/WPA2-adgangsfrase for den trådløse
+#d-i priority-critical select netcfg/wireless_wpa
+#d-i netcfg/wireless_wpa string seen false
+#d-i netcfg/wireless_show_essids select manual
+#d-i netcfg/wireless_security_type select seen false
+#d-i netcfg/wireless_essid select seen false
+#d-i netcfg/ seen true
+#d-i netcfg/hostname string seen false
+
+### Description: Wireless network:
+#   Select the wireless network to use during the installation process.
+#d-i netcfg/wireless_show_essids select <choice>
+# Possible choices: ${essid_list} Enter ESSID manually
+
+#d-i debconf/priority string high
+
+### Localization
+
+# TEST
+# Language and locale
+d-i debian-installer/language string da
+d-i debian-installer/country string DK
+d-i debian-installer/locale string da_DK.UTF-8
+
+# Keyboard configuration
+d-i keyboard-configuration/xkb-keymap select dk
+d-i keyboard-configuration/variant select Danish
+d-i keyboard-configuration/layoutcode string dk
+d-i keyboard-configuration/layout select da
+
+# Preseeding only locale sets language, country and locale.
+#d-i debian-installer/locale string da_DK.UTF-8
+d-i localechooser/translation/warn-light boolean true
+d-i localechooser/translation/warn-severe boolean true
+#
+# FROM sudo debconf-get-selections --installer
+d-i debconf/language string da
+#
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/locale string da_DK.UTF-8
+#d-i debian-installer/language string da
+#d-i debian-installer/country string DK
+
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales multiselect en_US.UTF-8, da_DK.UTF-8
+
+# Keyboard selection.
+#d-i keyboard-configuration/xkb-keymap select dk
+# d-i keyboard-configuration/toggle select No toggling
+
+### Speech synthesis
+# Which ALSA card to be used for software speech.
+# Can be a number from 0, or an ID as seen in
+# /sys/class/sound/card*/id
+#d-i espeakup/card string 0
+
+# Which espeak-ng voice to be used
+#d-i espeakup/voice string en
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# Set prioritys
+#d-i debconf/priority string critical
+#d-i netcfg/hostname?=danos-test
+#d-i netcfg/hostname string danos-test
+#d-i netcfg/hostname seen true
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+#d-i netcfg/link_wait_timeout string 10
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+#d-i netcfg/dhcpv6_timeout string 60
+
+# Automatic network configuration is the default.
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_autoconfig boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#
+# IPv4 example
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+#
+# IPv6 example
+#d-i netcfg/get_ipaddress string fc00::2
+#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
+#d-i netcfg/get_gateway string fc00::1
+#d-i netcfg/get_nameservers string fc00::1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+#d-i netcfg/get_hostname string danos-test
+#d-i netcfg/get_domain string 
+
+
+# If you want to force a hostname, regardless of what either the DHCP
+# server returns or what the reverse DNS entry for the IP is, uncomment
+# and adjust the following line.
+#d-i netcfg/hostname string somehost
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If you want to completely disable firmware lookup (i.e. not use firmware
+# files or packages that might be available on installation images):
+#d-i hw-detect/firmware-lookup string never
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# Mirror protocol:
+# If you select ftp, the mirror/country string does not need to be set.
+# Default value for the mirror protocol: http.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string http.deb.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+#d-i passwd/root-password password Power2ad
+#d-i passwd/root-password-again password Power2ad
+# or encrypted using a crypt(3)  hash.
+#d-i passwd/root-password-crypted password [crypt(3) hash]
+
+# To create a normal user account.
+d-i passwd/user-fullname string DanOS Debian
+d-i passwd/username string danos
+# Normal user's password, either in clear text
+d-i passwd/user-password password Danos
+d-i passwd/user-password-again password Danos
+# or encrypted using a crypt(3) hash.
+#d-i passwd/user-password-crypted password [crypt(3) hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+#d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+#d-i time/zone string Europe/Copenhagen
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+#d-i debconf/priority string critical
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/sda
+# and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string regular
+
+# You can define the amount of space that will be used for the LVM volume
+# group. It can either be a size with its unit (eg. 20 GB), a percentage of
+# free space or the 'max' keyword.
+#d-i partman-auto-lvm/guided_size string max
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+#d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+#d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+#d-i partman-lvm/confirm boolean true
+#d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /var, and /tmp partitions
+# - server: separate /var and /srv partitions; swap limitted to 1G
+# - small_disk: scheme dedicated to small harddrives (under 10GB)
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+## Partitioning for EFI
+# If your system needs an EFI partition you could add something like
+# this to the recipe above, as the first element in the recipe:
+#               538 538 1075 free                              \
+#                      $iflabel{ gpt }                         \
+#                      $reusemethod{ }                         \
+#                      method{ efi }                           \
+#                      format{ }                               \
+#               .                                              \
+#
+# The fragment above is for the amd64 architecture; the details may be
+# different on other architectures. The 'partman-auto' package in the
+# D-I source repository may have an example you can follow.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.
+#d-i partman-efi/non_efi_system boolean true
+# Ensure the partition table is GPT - this is required for EFI
+#d-i partman-partitioning/choose_label select gpt
+#d-i partman-partitioning/default_label string gpt
+
+# When disk encryption is enabled, skip wiping the partitions beforehand.
+d-i partman-auto-crypto/erase_disks boolean false
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used. 
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+#d-i partman-md/confirm boolean true
+#d-i partman-partitioning/confirm_write_new_label boolean true
+#d-i partman/choose_partition select finish
+#d-i partman/confirm boolean true
+#d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-686
+
+### Apt setup
+# Choose, if you want to scan additional installation media
+# (default: false).
+d-i apt-setup/cdrom/set-first boolean false
+# You can choose to install non-free firmware.
+d-i apt-setup/non-free-firmware boolean true
+# You can choose to install non-free and contrib software.
+d-i apt-setup/non-free boolean true
+d-i apt-setup/contrib boolean true
+# Uncomment the following line, if you don't want to have the sources.list
+# entry for a DVD/BD installation image active in the installed system
+# (entries for netinst or CD images will be disabled anyway, regardless of
+# this setting).
+#d-i apt-setup/disable-cdrom-entries boolean true
+# Uncomment this if you don't want to use a network mirror.
+d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+d-i apt-setup/services-select multiselect security, updates
+d-i apt-setup/security_host string security.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out.
+#d-i apt-setup/local0/key string http://local.server/key
+# or one can provide it in-line by base64 encoding the contents of the
+# key file (with `base64 -w0`) and specifying it thus:
+#d-i apt-setup/local0/key string base64://LS0tLS1CRUdJTiBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tCi4uLgo=
+# The content of the key file is checked to see if it appears to be ASCII-armoured.
+# If so it will be saved with an ".asc" extension, otherwise it gets a '.gpg' extension.
+# "keybox database" format is currently not supported. (see generators/60local in apt-setup's source)
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+# Uncomment this to add multiarch configuration for i386
+#d-i apt-setup/multiarch string i386
+
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server, kde-desktop
+tasksel tasksel/first multiselect standard, ssh-server
+
+# Or choose to not get the tasksel dialog displayed at all (and don't install
+# any packages):
+#d-i pkgsel/run_tasksel boolean false
+
+# Individual additional packages to install
+#d-i pkgsel/include string wget curl git 
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# You can choose, if your system will report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and should be included on the first DVD.
+popularity-contest popularity-contest/participate boolean false
+
+### Boot loader installation
+# Grub is the boot loader (for x86).
+
+# This is fairly safe to set, it makes grub install automatically to the UEFI
+# partition/boot record if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the UEFI partition/boot record, if
+# it also finds some other OS, which is less safe as it might not be able to
+# boot that other OS.
+d-i grub-installer/with_other_os boolean true
+
+# Due notably to potential USB sticks, the location of the primary drive can
+# not be determined safely in general, so this needs to be specified:
+#d-i grub-installer/bootdev  string /dev/sda
+# To install to the primary device (assuming it is not a USB stick):
+#d-i grub-installer/bootdev  string default
+
+# Alternatively, if you want to install to a location other than the UEFI
+# parition/boot record, uncomment and edit these lines:
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+#d-i grub-installer/bootdev  string (hd0,1)
+# To install grub to multiple disks:
+#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)
+
+# Optional password for grub, either in clear text
+#d-i grub-installer/password password r00tme
+#d-i grub-installer/password-again password r00tme
+# or encrypted using an MD5 hash, see grub-md5-crypt(8).
+#d-i grub-installer/password-crypted password [MD5 hash]
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+#d-i debian-installer/add-kernel-opts string nousb
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the disc during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+
+# Include the DanOS post installation script.
+d-i preseed/late_command string apt-install wget sed grep coreutils bash; \
+    NEW_USERHOME=$(grep ":1000:" /target/etc/passwd | cut -d: -f6); \
+    NEW_USERNAME=$(grep ":1000:" /target/etc/passwd | cut -d: -f1); \
+    cp -rfp /cdrom/src/ /target/tmp/; \
+    cp -rfp /cdrom/src/ /target/root/; \
+    cp -pf /cdrom/install.sh /target/root/install.sh; \
+    in-target /bin/sh /root/install.sh
+

remaster-debian-iso-and-preseed.sh

@@ -3,12 +3,12 @@
 # sudo apt install -y wget git xorriso isolinux p7zip-full fakeroot binutils
 
 # DVD ISO Base offline
-DEBIAN_ISO_URL=https://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/
-GET_ISO_NAME=$(curl -s https://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/ | grep -oP 'debian-\d+(?:\.\d+)+-amd64-DVD-1\.iso' | head -n 1)
+#DEBIAN_ISO_URL=https://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/
+#GET_ISO_NAME=$(curl -s https://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/ | grep -oP 'debian-\d+(?:\.\d+)+-amd64-DVD-1\.iso' | head -n 1)
 
-# NetInstall iso
-#DEBIAN_ISO_URL=https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/
-#GET_ISO_NAME=$(curl -s https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/ | grep -oP 'debian-\d+(?:\.\d+)+-amd64-netinst\.iso' | head -n 1)
+# NetInstall ISO
+DEBIAN_ISO_URL=https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/
+GET_ISO_NAME=$(curl -s https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/ | grep -oP 'debian-\d+(?:\.\d+)+-amd64-netinst\.iso' | head -n 1)
 #
 PRESEED_ISO_NAME=DanOS-Debian
 #WORK_DIR=$(pwd) #BRUGES IKKE MERE
@@ -17,6 +17,9 @@ ISO_WORK_TMP=iso-extract
 # Setup the environment for creating the new ISO version.
 function setup() {
   sudo apt update && sudo apt install -y wget git xorriso isolinux p7zip-full fakeroot binutils
+  if [ -f source-debian.iso ]; then
+    rm source-debian.iso
+  fi
   if [ ! -f source-debian.iso ]; then
     wget -O source-debian.iso $DEBIAN_ISO_URL/"$GET_ISO_NAME"
   fi
@@ -24,11 +27,18 @@ function setup() {
   sudo chmod -R +w $ISO_WORK_TMP
   sudo cp preseed-user.cfg $ISO_WORK_TMP/preseed.cfg || exit 1
   sudo cp -rfup src/ iso-extract/ || exit 1
+  sudo cp src/grub/splash.png $ISO_WORK_TMP/isolinux/splash.png || exit 1
   sudo cp install-danos.sh $ISO_WORK_TMP/install.sh || exit 1
-  sudo sed -i 's/append vga/append auto=true priority=critical vga/' $ISO_WORK_TMP/isolinux/gtk.cfg
+  sudo sed -i 's/append vga/append auto=true vga/' $ISO_WORK_TMP/isolinux/gtk.cfg
   sudo sed -i '/spkgtk\.cfg/d; /spk\.cfg/d' $ISO_WORK_TMP/isolinux/menu.cfg
   sudo sed -i 's/--- quiet/--- quiet file=\/cdrom\/preseed.cfg/' $ISO_WORK_TMP/isolinux/gtk.cfg
-  sudo sed -i '0,/--- quiet/ s/--- quiet/auto=true priority=critical file=\/cdrom\/preseed.cfg --- quiet/' $ISO_WORK_TMP/boot/grub/grub.cfg
+  #sudo sed -i '0,/--- quiet/ s/--- quiet/auto=true file=\/cdrom\/preseed.cfg --- quiet/' $ISO_WORK_TMP/boot/grub/grub.cfg
+  sudo sed -i '0,/--- quiet/ s/--- quiet/auto=true priority=high file=\/cdrom\/preseed.cfg --- quiet/' $ISO_WORK_TMP/boot/grub/grub.cfg
+  sudo sed -i '/set theme=\/boot\/grub\/theme\/1/a set default=0' $ISO_WORK_TMP/boot/grub/grub.cfg
+  sudo sed -i '/set theme=\/boot\/grub\/theme\/1/a set timeout=7' $ISO_WORK_TMP/boot/grub/grub.cfg
+  if [ -f source-debian.iso ]; then
+    rm source-debian.iso
+  fi
   #sudo mkdir -p $ISO_WORK_TMP/var/cache/apt/archives
   #sudo apt reinstall --download-only -y -o Dir::Cache="./" -o Dir::Cache::archives="iso-extract/src/packages/" \
   #  wget curl git xdg-utils xdg-user-dirs build-essential htop dkms cmake plymouth plymouth-themes power-profiles-daemon wayland-protocols wayland-utils wlr-randr libwlroots-0.18
@@ -43,7 +53,7 @@ function make() {
     sudo cp -fu install-danos.sh $ISO_WORK_TMP/install.sh || exit 1
     sudo cp preseed-user.cfg $ISO_WORK_TMP/preseed.cfg || exit 1
     if [ -f $PRESEED_ISO_NAME.iso ]; then rm $PRESEED_ISO_NAME.iso; fi
-    xorriso -as mkisofs -o $PRESEED_ISO_NAME.iso -V "Debian DanOS" -isohybrid-mbr /usr/lib/ISOLINUX/isohdpfx.bin -c isolinux/boot.cat -b isolinux/isolinux.bin -no-emul-boot -boot-load-size 4 -boot-info-table -eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -isohybrid-gpt-basdat $ISO_WORK_TMP
+    xorriso -as mkisofs -o $PRESEED_ISO_NAME.iso -V "DANOS_DEBIAN" -isohybrid-mbr /usr/lib/ISOLINUX/isohdpfx.bin -c isolinux/boot.cat -b isolinux/isolinux.bin -no-emul-boot -boot-load-size 4 -boot-info-table -eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -isohybrid-gpt-basdat $ISO_WORK_TMP
     ls -lah ./*.iso
 
   else

src/autogen-qtile-keybinding.sh

@@ -1,421 +0,0 @@
-#!/usr/bin/env python3
-
-##############################################
-#  Auto Qtile keybindings - image generator  #
-#     Qmade version of the configuration     #
-##############################################
-
-import getopt
-import os
-import sys
-
-import cairocffi as cairo
-from cairocffi import ImageSurface
-
-this_dir = os.path.dirname(__file__)
-base_dir = os.path.abspath(os.path.join(this_dir, ".."))
-sys.path.insert(0, base_dir)
-
-BUTTON_NAME_Y = 65
-BUTTON_NAME_X = 10
-
-COMMAND_Y = 20
-COMMAND_X = 10
-
-LEGEND = ["modifiers", "layout", "group", "window", "other"]
-
-CUSTOM_KEYS = {
-    "Backspace": 2,
-    "Tab": 1.5,
-    "\\": 1.5,
-    "Return": 2.4533,
-    "shift": 2,
-    "space": 5,
-}
-
-class Button:
-    def __init__(self, key, x, y, width, height):
-        self.key = key
-        self.x = x
-        self.y = y
-        self.width = width
-        self.height = height
-
-
-class Pos:
-    WIDTH = 78
-    HEIGHT = 70
-    GAP = 5
-
-    def __init__(self, x, y):
-        self.x = x
-        self.row_x = x
-        self.y = y
-        self.custom_width = {}
-        for i, val in CUSTOM_KEYS.items():
-            self.custom_width[i] = val * self.WIDTH
-
-    def get_pos(self, name):
-        if name in self.custom_width:
-            width = self.custom_width[name]
-        else:
-            width = self.WIDTH
-
-        info = Button(name, self.x, self.y, width, self.HEIGHT)
-
-        self.x = self.x + self.GAP + width
-
-        return info
-
-    def skip_x(self, times=1):
-        self.x = self.x + self.GAP + times * self.WIDTH
-
-    def next_row(self):
-        self.x = self.row_x
-        self.y = self.y + self.GAP + self.HEIGHT
-
-
-class KeyboardPNGFactory:
-    def __init__(self, modifiers, keys):
-        self.keys = keys
-        self.modifiers = modifiers.split("-")
-        self.key_pos = self.calculate_pos(20, 140)
-
-    def rgb_red(self, context):
-        context.set_source_rgb(0.8431372549, 0.3725490196, 0.3725490196)
-
-    def rgb_green(self, context):
-        context.set_source_rgb(0.6862745098, 0.6862745098, 0)
-
-    def rgb_yellow(self, context):
-        context.set_source_rgb(1, 0.6862745098, 0)
-
-    def rgb_cyan(self, context):
-        context.set_source_rgb(0.5137254902, 0.6784313725, 0.6784313725)
-
-    def rgb_violet(self, context):
-        context.set_source_rgb(0.831372549, 0.5215686275, 0.6784313725)
-
-    def calculate_pos(self, x, y):
-        pos = Pos(x, y)
-
-        key_pos = {}
-        for c in "`1234567890-=":
-            key_pos[c] = pos.get_pos(c)
-
-        key_pos["Backspace"] = pos.get_pos("Backspace")
-        pos.next_row()
-
-        key_pos["Tab"] = pos.get_pos("Tab")
-        for c in "qwertyuiop[]\\":
-            key_pos[c] = pos.get_pos(c)
-        pos.next_row()
-
-        pos.skip_x(1.6)
-        for c in "asdfghjkl;'":
-            key_pos[c] = pos.get_pos(c)
-        key_pos["Return"] = pos.get_pos("Return")
-        pos.next_row()
-
-        key_pos["shift"] = pos.get_pos("shift")
-        for c in "zxcvbnm":
-            key_pos[c] = pos.get_pos(c)
-        key_pos["period"] = pos.get_pos("period")
-        key_pos["comma"] = pos.get_pos("comma")
-        key_pos["/"] = pos.get_pos("/")
-        pos.next_row()
-
-        key_pos["control"] = pos.get_pos("control")
-        pos.skip_x()
-        key_pos["mod4"] = pos.get_pos("mod4")
-        key_pos["mod1"] = pos.get_pos("mod1")
-        key_pos["space"] = pos.get_pos("space")
-        key_pos["Print"] = pos.get_pos("Print")
-        pos.skip_x(3)
-        key_pos["Up"] = pos.get_pos("Up")
-
-        pos.next_row()
-        pos.skip_x(12.33)
-        key_pos["Left"] = pos.get_pos("Left")
-        key_pos["Down"] = pos.get_pos("Down")
-        key_pos["Right"] = pos.get_pos("Right")
-
-        pos.next_row()
-
-        for legend in LEGEND:
-            key_pos[legend] = pos.get_pos(legend)
-
-        pos.skip_x(5)
-        key_pos["Button1"] = pos.get_pos("Button1")
-        key_pos["Button2"] = pos.get_pos("Button2")
-        key_pos["Button3"] = pos.get_pos("Button3")
-
-        pos.next_row()
-        key_pos["FN_KEYS"] = pos.get_pos("FN_KEYS")
-
-        return key_pos
-
-    def render(self, filename):
-        surface = cairo.ImageSurface(cairo.FORMAT_ARGB32, 1280, 800)
-        context = cairo.Context(surface)
-        with context:
-            context.set_source_rgb(1, 1, 1)
-            context.paint()
-
-        context.move_to(40, 50)
-        context.set_font_size(34)
-        context.show_text("Qmade - Keybindings for Qtile")
-
-        context.move_to(40, 80)
-        context.set_font_size(22)
-        if len([i for i in self.modifiers if i]):
-            context.show_text("Modifiers: " + ", ".join(self.modifiers))
-        else:
-            context.show_text("No modifiers used.")
-
-        for i in self.key_pos.values():
-            if i.key in ["FN_KEYS"]:
-                continue
-
-            self.draw_button(context, i.key, i.x, i.y, i.width, i.height)
-
-        # draw functional
-        fn = [i for i in keys.values() if i.key[:4] == "XF86"]
-        if len(fn):
-            fn_pos = self.key_pos["FN_KEYS"]
-            x = fn_pos.x
-            for i in fn:
-                self.draw_button(context, i.key, x, fn_pos.y, fn_pos.width, fn_pos.height)
-                x += Pos.GAP + Pos.WIDTH
-
-        # draw mouse base
-        context.rectangle(830, 670, 244, 90)
-        context.set_source_rgb(0, 0, 0)
-        context.stroke()
-        context.set_font_size(28)
-        context.move_to(900, 730)
-        context.show_text("MOUSE")
-
-        surface.write_to_png(filename)
-
-    def draw_button(self, context, key, x, y, width, height):
-        radius = 5  # Radius for the rounded corners
-        fn = False
-        if key[:4] == "XF86":
-            fn = True
-
-        if key in LEGEND:
-            if key == "modifiers":
-                self.rgb_red(context)
-            elif key == "group":
-                self.rgb_green(context)
-            elif key == "layout":
-                self.rgb_cyan(context)
-            elif key == "window":
-                self.rgb_yellow(context)
-            else:
-                self.rgb_violet(context)
-            self.rounded_rectangle(context, x, y, width, height, radius)
-            context.fill()
-
-        if key in self.modifiers:
-            self.rounded_rectangle(context, x, y, width, height, radius)
-            self.rgb_red(context)
-            context.fill()
-
-        if key in self.keys:
-            k = self.keys[key]
-            self.rounded_rectangle(context, x, y, width, height, radius)
-            self.set_key_color(context, k)
-            context.fill()
-
-            self.show_multiline(context, x + COMMAND_X, y + COMMAND_Y, k)
-
-        self.rounded_rectangle(context, x, y, width, height, radius)
-        context.set_source_rgb(0, 0, 0)
-        context.stroke()
-
-        if fn:
-            key = key[4:]
-            context.set_font_size(10)
-        else:
-            context.set_font_size(14)
-
-        context.move_to(x + BUTTON_NAME_X, y + BUTTON_NAME_Y)
-        context.show_text(self.translate(key))
-
-    def rounded_rectangle(self, context, x, y, width, height, radius):
-        context.new_path()
-        context.arc(x + radius, y + radius, radius, 2 * (3.14 / 2), 3 * (3.14 / 2))
-        context.arc(x + width - radius, y + radius, radius, 3 * (3.14 / 2), 4 * (3.14 / 2))
-        context.arc(x + width - radius, y + height - radius, radius, 0, 3.14 / 2)
-        context.arc(x + radius, y + height - radius, radius, 3.14 / 2, 2 * (3.14 / 2))
-        context.close_path()
-
-    def show_multiline(self, context, x, y, key):
-        """Cairo doesn't support multiline. Added with word wrapping."""
-        c_width = 14
-        if key.key in CUSTOM_KEYS:
-            c_width *= CUSTOM_KEYS[key.key]
-
-        context.set_font_size(10)
-        context.set_source_rgb(0, 0, 0)
-        context.move_to(x, y)
-        words = key.command.split(" ")
-        words.reverse()
-        printable = last_word = words.pop()
-        while len(words):
-            last_word = words.pop()
-            if len(printable + " " + last_word) < c_width:
-                printable += " " + last_word
-                continue
-
-            context.show_text(printable)
-            y += 10
-            context.move_to(x, y)
-            printable = last_word
-
-        if last_word is not None:
-            context.show_text(printable)
-
-    def set_key_color(self, context, key):
-        if key.scope == "group":
-            self.rgb_green(context)
-        elif key.scope == "layout":
-            self.rgb_cyan(context)
-        elif key.scope == "window":
-            self.rgb_yellow(context)
-        else:
-            self.rgb_violet(context)
-
-    def translate(self, text):
-        dictionary = {
-            "period": ",",
-            "comma": ".",
-            "Left": "←",
-            "Down": "↓",
-            "Right": "→",
-            "Up": "↑",
-            "AudioRaiseVolume": "Volume up",
-            "AudioLowerVolume": "Volume down",
-            "AudioMute": "Audio mute",
-            "AudioMicMute": "Mic mute",
-            "MonBrightnessUp": "Brightness up",
-            "MonBrightnessDown": "Brightness down",
-        }
-
-        if text not in dictionary:
-            return text
-
-        return dictionary[text]
-
-
-class KInfo:
-    NAME_MAP = {
-        "togroup": "to group",
-        "toscreen": "to screen",
-    }
-
-    def __init__(self, key):
-        self.key = key.key
-        self.command = self.get_command(key)
-        self.scope = self.get_scope(key)
-
-    def get_command(self, key):
-        if hasattr(key, "desc") and key.desc:
-            return key.desc
-
-        cmd = key.commands[0]
-        command = cmd.name
-        if command in self.NAME_MAP:
-            command = self.NAME_MAP[command]
-
-        command = command.replace("_", " ")
-
-        if len(cmd.args):
-            if isinstance(cmd.args[0], str):
-                command += " " + cmd.args[0]
-
-        return command
-
-    def get_scope(self, key):
-        selectors = key.commands[0].selectors
-        if len(selectors):
-            return selectors[0][0]
-
-
-class MInfo(KInfo):
-    def __init__(self, mouse):
-        self.key = mouse.button
-        self.command = self.get_command(mouse)
-        self.scope = self.get_scope(mouse)
-
-
-def get_kb_map(config_path=None):
-    from libqtile.confreader import Config
-
-    c = Config(config_path)
-    if config_path:
-        c.load()
-
-    kb_map = {}
-    for key in c.keys:
-        mod = "-".join(key.modifiers)
-        if mod not in kb_map:
-            kb_map[mod] = {}
-
-        info = KInfo(key)
-        kb_map[mod][info.key] = info
-
-    for mouse in c.mouse:
-        mod = "-".join(mouse.modifiers)
-        if mod not in kb_map:
-            kb_map[mod] = {}
-
-        info = MInfo(mouse)
-        kb_map[mod][info.key] = info
-
-    return kb_map
-
-
-help_doc = """
-usage: gen-keybinding-img [-h] [-c CONFIGFILE] [-o OUTPUT_DIR]
-
-Qtile keybindings image generator
-
-optional arguments:
-    -h, --help          show this help message and exit
-    -c CONFIGFILE, --config CONFIGFILE
-                        use specified configuration file. If no presented
-                        default will be used
-    -o OUTPUT_DIR, --output-dir OUTPUT_DIR
-                        set directory to export all images to
-"""
-if __name__ == "__main__":
-    config_path = os.path.expanduser("~/.config/qtile/config.py")  # Set default config path
-    output_dir = ""
-    try:
-        opts, args = getopt.getopt(sys.argv[1:], "hc:o:", ["help=", "config=", "output-dir="])
-    except getopt.GetoptError:
-        print(help_doc)
-        sys.exit(2)
-
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-            print(help_doc)
-            sys.exit()
-        elif opt in ("-c", "--config"):
-            config_path = arg
-        elif opt in ("-o", "--output-dir"):
-            output_dir = arg
-
-    kb_map = get_kb_map(config_path)
-    for modifier, keys in kb_map.items():
-        if not modifier:
-            filename = "keybinding_no_modifier.png"
-        else:
-            filename = "keybinding_{}.png".format(modifier)
-
-        output_file = os.path.abspath(os.path.join(output_dir, filename))
-        f = KeyboardPNGFactory(modifier, keys)
-        f.render(output_file)

src/config/qtile/autostart.sh

@@ -5,6 +5,11 @@ pgrep -x picom >/dev/null || picom --backend xrender --vsync --no-fading-openclo
 
 exec /usr/bin/lxpolkit & # Graphical authentication agent
 
+# Run "ARandr" to set the desired screens with resolution and refresh rate and save it as a profile using.
+# Terminal command.: autorandr --save PROFILENAME
+#
+# See more https://man.archlinux.org/man/extra/autorandr/autorandr.1.en
+#
 autorandr --change &
 
 # This here if statement sets your background image, with feh...
@@ -30,11 +35,16 @@ fi
 #kdeconnectd &
 #
 # Turn off the Screen after X time in seconds
-xset s 2700 &
+xset dpms 2700 2700 2700 &
 
-# Run & Remove .first-login-user-setup file --------------------------------------------------------------
+# Run & Remove .user-setup / .first-login-user-setup files --------------------------------------------------------------
 if [ -f ~/.first-login-user-setup ]; then
   . ~/.first-login-user-setup
   sleep 0.69
   rm -f ~/.first-login-user-setup
 fi
+if [ -f ~/.user-setup ]; then
+  . ~/.user-setup
+  sleep 0.69
+  rm -f ~/.user-setup
+fi

src/config/qtile/config.py

@@ -227,9 +227,9 @@ keys.extend([
 ])
 # ScratchPads
 groups.append(ScratchPad("scratchpad", [
-    DropDown("term1", "kitty --class=scratch", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=False),
+    DropDown("term1", "kitty --class=scratch", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=True),
     DropDown("term2", "kitty --class=scratch --override background_opacity=1", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=False),
-    DropDown("term3", "kitty --class=scratch --override background_opacity=1", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=False),
+    DropDown("term3", "kitty --class=scratch --override background_opacity=1", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=True),
     DropDown("term4", "kitty --class=scratch --override background_opacity=1", width=0.9, height=0.9, x=0.5 - (0.9 / 2), y=0.5 - (0.9 / 2), opacity=1, on_focus_lost_hide=False),
     DropDown("file-explorer", "kitty --class=yazi --override background_opacity=1 -e sudo yazi", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1, on_focus_lost_hide=False),
     DropDown("audio", "kitty --class=volume -e alsamixer", width=0.8, height=0.8, x=0.5 - (0.8 / 2), y=0.5 - (0.8 / 2), opacity=1),

src/grub/grub.cfg

@@ -0,0 +1,51 @@
+if [ x$feature_default_font_path = xy ] ; then
+   font=unicode
+else
+   font=$prefix/font.pf2
+fi
+
+if loadfont $font ; then
+  set gfxmode=1024x768
+  set gfxpayload=keep
+  insmod efi_gop
+  insmod efi_uga
+  insmod video_bochs
+  insmod video_cirrus
+  insmod gfxterm
+  insmod png
+  # Added as a workaround for #1110759
+  echo "Loading bootloader..."
+  terminal_output gfxterm
+fi
+
+if background_image /isolinux/splash.png; then
+  set color_normal=light-gray/black
+  set color_highlight=white/black
+elif background_image /splash.png; then
+  set color_normal=light-gray/black
+  set color_highlight=white/black
+else
+  set menu_color_normal=cyan/blue
+  set menu_color_highlight=white/blue
+fi
+
+insmod play
+play 960 440 1 0 4 440 1
+set theme=/boot/grub/theme/1
+set timeout=5
+set default=0
+menuentry --hotkey=g 'Graphical Install' {
+    set background_color=black
+    linux    /install.amd/vmlinuz vga=788 auto=true file=/cdrom/preseed.cfg --- quiet 
+    initrd   /install.amd/gtk/initrd.gz
+}
+menuentry 'Graphical Rescue Mode' {
+    set background_color=black
+    linux    /install.amd/vmlinuz vga=788 rescue/enable=true --- quiet  
+    initrd   /install.amd/gtk/initrd.gz
+}
+menuentry --hotkey=s 'Install with speech synthesis' {
+    set background_color=black
+    linux    /install.amd/vmlinuz vga=788 auto=true file=/cdrom/preseed.cfg speakup.synth=soft --- quiet 
+    initrd   /install.amd/gtk/initrd.gz
+}

src/remaster-debian-iso-and-preseed.sh

@@ -1,64 +0,0 @@
-#!/usr/bin/env bash
-# Debian ISO Remastering for QMADE - https://github.com/ITmail-dk/qmade/
-# sudo apt install -y wget git xorriso isolinux p7zip-full fakeroot binutils
-
-DEBIAN_ISO_URL=https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/
-GET_ISO_NAME=$(curl -s https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/ | grep -oP 'debian-\d+(?:\.\d+)+-amd64-netinst\.iso' | head -n 1)
-PRESEED_ISO_NAME=QMADE-Debian
-#WORK_DIR=$(pwd)
-ISO_WORK_TMP=iso-extract
-
-# Setup the environment for creating the new ISO version.
-function setup() {
-  sudo apt update && sudo apt install -y wget git xorriso isolinux p7zip-full fakeroot binutils
-  if [ ! -f Debian-source.iso ]; then
-    wget -O Debian-source.iso $DEBIAN_ISO_URL/"$GET_ISO_NAME"
-  fi
-  xorriso -osirrox on -indev Debian-source.iso -extract / $ISO_WORK_TMP
-  sudo chmod -R +w $ISO_WORK_TMP
-  sudo mkdir -p $ISO_WORK_TMP/var/cache/apt/archives
-  if [ ! -f preseed.cfg ]; then
-    wget https://raw.githubusercontent.com/ITmail-dk/qmade/refs/heads/main/preseed.cfg
-  fi
-  sudo cp preseed.cfg $ISO_WORK_TMP
-  sudo sed -i 's/append vga/append auto=true priority=critical vga/' $ISO_WORK_TMP/isolinux/gtk.cfg
-  sudo sed -i '/spkgtk\.cfg/d; /spk\.cfg/d' $ISO_WORK_TMP/isolinux/menu.cfg
-  sudo sed -i 's/--- quiet/--- quiet file=\/cdrom\/preseed.cfg/' $ISO_WORK_TMP/isolinux/gtk.cfg
-  sudo sed -i '0,/--- quiet/ s/--- quiet/--- quiet file=\/cdrom\/preseed.cfg/' $ISO_WORK_TMP/boot/grub/grub.cfg
-  sudo apt reinstall --download-only -y -o Dir::Cache="./" -o Dir::Cache::archives="iso-extract/var/cache/apt/archives" \
-    bash-completion xserver-xorg x11-utils xinit acl arandr autorandr picom fwupd colord mesa-utils htop wget curl git tmux \
-    numlockx kitty neovim xdg-utils cups cups-common lm-sensors fancontrol xbacklight brightnessctl unzip network-manager \
-    dnsutils dunst libnotify-bin notify-osd xsecurelock pm-utils rofi 7zip jq poppler-utils fd-find ripgrep zoxide sddm \
-    imagemagick nsxiv mpv flameshot mc thunar gvfs gvfs-backends parted gparted mpd mpc ncmpcpp fzf ccrypt xarchiver \
-    notepadqq font-manager fontconfig fontconfig-config fonts-recommended fonts-liberation fonts-freefont-ttf \
-    fonts-noto-core libfontconfig1 pipewire pipewire-audio pipewire-alsa pipewire-pulse pipewire-jack wireplumber \
-    libspa-0.2-bluetooth pavucontrol alsa-utils qpwgraph sddm-theme-breeze sddm-theme-maui ffmpeg cmake \
-    policykit-1-gnome remmina libreoffice keynav
-  sudo chmod -R +r iso-extract/var/
-  make
-}
-
-# Make a new ISO file after removing the old one if it exists.
-function make() {
-  if [ -d $ISO_WORK_TMP ]; then
-    if [ -f $PRESEED_ISO_NAME.iso ]; then rm $PRESEED_ISO_NAME.iso; fi
-    xorriso -as mkisofs -o $PRESEED_ISO_NAME.iso -V "Debian QMADE" -isohybrid-mbr /usr/lib/ISOLINUX/isohdpfx.bin -c isolinux/boot.cat -b isolinux/isolinux.bin -no-emul-boot -boot-load-size 4 -boot-info-table -eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -isohybrid-gpt-basdat $ISO_WORK_TMP
-    ls -lah ./*.iso
-
-  else
-    echo "$ISO_WORK_TMP does not exist, runing setup..."
-    setup
-  fi
-}
-
-function usb() {
-  lsblk
-  echo -en "Enter the name of the USB Disk so sda, sdb etc..: "
-  read -r USB_DISK
-  clear
-  sudo dd bs=4M status=progress conv=fsync oflag=direct if="$(pwd)"/$PRESEED_ISO_NAME.iso of=/dev/"$USB_DISK"
-  echo "ISO to USB All done."
-}
-
-# Run the function by, function_name
-"$@" make